China Monel Pipe suppliers Description Of Monel K500 Seamless Pipe Compared with other high-temperature alloys, Monel K500 seamless pipe is also known for its ease of manufacture, and it is basically non-magnetic even at low temperatures. There are differences between Monel K500 seamless pipes and welded and drawn pipes. The seamless (SMLS) tube is formed by drawing a solid blank on a puncture rod to form a hollow shell. Seamless pipes can withstand pressure better than other types of pipes and are generally easier to obtain than welded pipes. Monel K500 seamless pipe is extruded and drawn from the blank. Seamless piping can avoid potential corrosion resistance defects in the welding area. Welded pipes are formed by rolled plates and welded seams. A spatula can be used to remove the weld from the external or internal surface. The weld zone can also be heat treated to make the seam less obvious. The Monel K500 welded pipe is made of strip material, which is rolled and welded into a tube. The price of welded pipe is much cheaper than seamless pipe, and it is easy to use continuously. Large diameter pipe (25 cm (10 inches) or larger) can be ERW, EFW or submerged arc welded pipe. Technical Parameters Of Monel K500 Seamless Pipe We pay attention to the quality of the Monel K500 seamless pipe. We are a professional pipe manufacturer, please rest assured to buy.China Monel Pipe suppliers website:http://www.kn-tubes.com/alloy-steel-pipe/monel-pipe/